Your current location：Home >> Products >>total 45 products
Product name：Internal Bond Tester
Product model：RH-T541
Download：Internal Bond Testerdownload
RH-T541 Internal Bond Tester
Introduction:
RH-T541 Internal Bond Tester is designed for measuring the internal fiber strength (Z-direction tensile strength) of paperboard. It widely used in the white paper board, box paper, kraft paper, white cardboard, parchment, bond and other internal bond strength testing. The bonding strength is an important index of cardboard printing performance.
Standards:
ISO15754、TAPPI T541、GB/T 31110-2014
Technical Parameters:
Measure Range
(10~1000) kPa
Resolution
0.1 kPa
Accuracy
±1%
Test area
(645±10)mm²
Test speed
(1~200) mm/min（Standard：66mm/min）
Pressure Range
99~1999N（Standard :900N） or 0.15～3.1MPa(Standard :1.4 MPa )
Time Range
1~200s
Dimensions
335 ×325 ×515 mm
Weighs
33kg
Power
AC220V，50Hz
Product Feature:
1.High precision and repeatability
Using high precision load cell transmission force value, American computer chip high-speed sampling control, stepper motor precision ball screw drive, coupled with reasonable design precision machining, to ensure the equipment is of high accuracy and repeatability.
2. High level of automation
From the compression and pasting time of adhesive tape to the z-direction rapid stretching (stripping).The automatic completion is not only convenient but also reduces human error, greatly improving the test accuracy.
3. Easy to use, easy to operate
High resolution color touch screen displayed in English, friendly man-machine interface operation. The test data statistical handling function, miniature printer output can also be connected to PC. Results when connected to a computer, in addition to the automatic memory storage, can also show that the tensile curves and save.
4. Used in scientific experiments and analysis
Stretch (peel off) test speed adhesion pressure compression time and other changeable preset, convenient for school scientific research units and other departments to conduct scientific experiments and analysis.
5. Easy to clean, easy calibration
The upper and lower pressure heads are easy to be removed, which makes it easy to leave residues on the adhesive tape during the cleaning experiment and to connect the standard sensor for force value calibration.
6. Superior performance
This instrument is a new generation of products developed and produced by our company according to the latest international standards.
Crush Tester
Vistor！